Smart Light Aluminium LED Street Light Body E Light

Min.Order: 1

Product origin: Ningbo, Zhejiang, China

Infringement complaint:

Complaint

US$ 26 ~ 35

Description

LED Street Light YASL-25
Outdoor Street Lights and pole top luminaires | Die casting man
Type of Protection: IP 66
Protection Class: II
Impact Protection: IK08
Housing made of corrosion resistant pressure die-cast aluminium (seawater resistant powder- coated). Pole-top fixing with integrated cable routing and stainless steel screws. Tilt angle can be adjusted and locked in 15 degree steps featuring angular scale. Cover clear tempered glass. Tool-free maintenance / replacement with disconnect plug .

Additional advantages
Installation on the pole as pole-top or side-mounted pole-top luminaire. Adjustable and lockable in 15° steps:
Both horizontal and vertical installing ways tilted from -15° to +15° (horizontal and vertical ways)
Two diameters available for pole top installation (45 mm and 60mm)

Smart lighting: Dali ,Dali Zhaga, 1-10V, PWM can be requested on dimming type / NEMA sockets available for the integration of components for light management systems or sensors.
Power interruption when the housing is opened.

Tool-free maintenance / replacement with disconnect plug (Power interruption when the housing is opened)
Seawater resistant coating
Control gear with integrated surge protection up to 10 kV or 20KV. (can be requested when you need completely luminaires)
Operating range: -40°C to +45°C.

IP66 CE RoHS

Product Specification:

Product code	YASL-25-40M	YASL-25-100M	YASL-25-150M	YASL-25-240M
Input Wattage	30/40/50/60w	80/100/120w	150/180/200w	240/300w
Color Temperature	4000K	4000K	4000K	4000K
Luminous Flux	3900-7500lm	7800-15000lm	15600-22500lm	26000-36000lm
Input Voltage	AC90~305V	AC90~305V	AC90~305V	AC90~305V
Frequency Range	50/60Hz	50/60Hz	50/60Hz	50/60Hz
Power Factor	PF≥0.95	PF≥0.95	PF≥0.95	PF≥0.95
color rendering index	Ra≥70	Ra≥70	Ra≥70	Ra≥70
Temperature of Working Condition	-40~50ºC	-40~50ºC	-40~50ºC	-40~50ºC
Humidity of Working Condition	20%~90%RH	20%~90%RH	20%~90%RH	20%~90%RH
LED Lifetime	50000h	50000h	50000h	50000h
Protectin Grade	IP66	IP66	IP66	IP66
Protection level	IK08/09/10	IK08/09/10	IK08/09/10	IK08/09/10
Installation Pipe Diameter	φ45/60mm	φ45/60mm	φ45/60mm	φ45/60/76mm
Installation Height	3-6m	4-10m	8-12m	10-14m
Net Weight	2.9kgs	3.8kgs	5.7kgs	7.2kgs
Gross Weight	3.4kgs	4.0kgs	6.0kgs	7.5kgs
Packing Size(m m)	600260165	680270160	820320160	920370180

INSTALL.
This fixture is mounted on a 4-16m in pole. lnstalling Ways Both Horizontal and Vertical available and adjustable angle-15°to+15°

Fixture has internal clamps to secure itself to pole.
This 150 Watt LED STREET LIGHT is ideal for residential street and parking lot outdoor lighting applications. It is
also IP66 Wet location rated and can operate in temperatures ranging from -40 degree to 50 degree. This fixture has 1000 hours
salt water spray test. Fixture is tough and durable rated at IK08 impact rating.

ENERGY SAVINGS.
High efficiency By illuminating your area with modern LED technology, you get a significant reduction in energy costs as well as superior light quality.
Compared to metal halide lamps ,the average savings obtained using LED Lighting is approx 70% ,90% to halogen lamps .
This fixture provides a lumen output equal to 400 Watt Metal Halide and can reduce your lighting bill when
compared to metal halide and hps lighting.

WARRANTY / CERTIFICATIONS.
LED Lighting Supply provides a 5 year warranty along with CE and Rebate Eligible certifications.

Photometric

DH-T1

DH-T3-M

DH-T4-M

DY-T3-M

GY-T2-M01

GX-T2-M

GX-T4-L

HX-T2-S

DH-T2-L

DH-T3-MA

DH-T5-M

GY-T1-M

GY-T3-M01

GX-T3-M

HY-T2-M

HX-T2-M

DH-T2-M

DH-T3-MB

DY-T2-M

GY-T2-M

GX-T2-S

GX-T4-M

HY-T3-M

HX-T3-M

Product Size

Product Code						YASL-25-100M
L(mm)						645
W(mm)						257
H(mm)						147

Streetlight Requirements - 5 Years Warranty Product

S.No	Requirement	Requirement	Test Standard
Physical requirements
1	Housing type	Heavy-duty rugged pressure die-cast aluminium alloy	ISO 3522
2	Cover	Tempered Glass
3	Gasket	Silicon Rubber gasket
4	Housing wattage range	30W 40W 50W 60W 80W 100W 150W 200W 220W 240W
5	Socket Options	NEMA socket, Photocell, Smart controller, Shorting Cap
6	Stainless-steel components	Minimum 316L Grade 316L
7	IP Protection	IP66	IEC 60529
8	IK Protection	IK08	IEC 62262
9	Tool free opening	Tool-free access to gear compartment
10	Corrosion tests in artificial atmospheres - Salt spray tests	EN/ISO 9227 - Corrosion tests in artificial atmospheres - Salt spray tests for 1000 hours	EN/ISO 9227
11	Vibration test	ANSI C136.31 - Roadway and Area Lighting Equipment - Luminaire Vibration	ANSI C136.31
LED and Optics
1	LED Make	SMD LEDs
2	LED Type	>2W High power LED with ceramic base (3V - Single chip die) >2w
3	LED driving current	<750ma<>
4	LED life	>100,000 hours @L95	LM80 and TM21
5	Optics Material	UV PC
6	Lighting distributions	Type I, II, III, IV
Thermal Requirements
1	Product ambient temperature range	-40°C to 55°C
2	Product Storage temperature range	up to 85°C
3	LED Case temperature (Tc)	<75°c>	1598
4	Driver Case temperature range	<85°c>	1598
Performance
1	Input Voltage Range	110V 120V 220V 270 305VAC - 50/60Hz	IEC 60598-2-3
2	Power Factor	>0.90	IEC 60598-2-3
3	THD	<20%<>	IEC 60598-2-3
4	Surge Protection	10KV
5	Dimming	1-10V or 1-10V+DALI
6	Appliance class	Class I or Class II	IEC 60598-2-3
7	CCT	3000K/4000K/5700K	ANSI C78.377A
8	CRI	>70Ra	ANSI C78.377A
9	MacAdam	<3 step="" binning="">	ANSI C78.377A
10	Product life	>100,000 hours @L80	TM28
11	Lumen efficacy As per LM-79	≥ 160lm/W (25°C ambient temperature)	LM-79
12	Lumen efficacy As per LM-82	Not more than 5% difference form LM79 result	LM-82
13	LED module connector and wire joint connectors	CE ENEC approved	IEC 60598-2-3
14	Electrical wires between Driver and LED modules and NEMA socket and driver	Must be CE approved	IEC 60598-2-3

Die-Casting man was established in 1996 which is one of the lighting manufacturers with design & development, production & testing.
We continue to offer a superior range of production and service including street light, high bay and die casting OEM products.
We can offer a full service or simple SKD supply only.

We understand that lighting technology has to be practical, affordable and reliable. So we always design and develop products
with our customers needs in mind. We have a team of lighting designers to design, develop and manufacture our own luminaries.
Also we fully understand high quality is another important element for long term business development. We keep it in mind that
products need to meet all EU requirements when we start design process. Our products are tested in credible, recognized laboratories
and throughout product development process they go through rigorous performance testing too.

We are a company never stand still on products and service.

1	what are your MOQ requirements	1-5 pieces for samples. 100MOQ for mass production. For your first order we can accept small quantity.
2	what about the LED Chips?	We can use the led chip that you required.
3	What about the LED driver?	We use any brand that you required.
4	What is your main product ?	Die-casting Man supply design, tooling, die-casting injection, machinning, painting, assembling and testing service for street light and OEM die casting products.
5	Guarantee of your product?	We offer 5 year guarantee for our customer. 50000 hours and 5 year guanrantee
6	Doea your fixture pass New EPR and Harmonics	Yes we are
7	Surge Protect	atleast 4kV for L-N and 6kV N/L-PE depends on which brand of drvier that you use.
8	Are you able to sell empty house	Yes we sell empty house
9	Do you have a body with easy plug and play module and driver installation	Yes, I suggest out type YASL-20 to you. Please see attached catalog page.
10	Can I put logo on the house?	Yes you can. We have two options. First option screen printing your logo on the house, no MOQ required. Second die casting logo on the house, MOQ 1000 pieces each item. There will be additional cost for both screen printing and die casting logo.
11	If I have some defective goods, what will you do?	If occasionally defective goods, we will send you free replacement with your next order. If defective rate >1%, We will send you free replacement components like driver, SPD, PCB with leds. We will not cover the freight and maintaining cost in your country.
12	what services can you provide?	Accepted Delivery Terms: FOB,CIF,EXW; Accepted Payment Currency:USD,EUR,GBP,CNY; Accepted Payment Type: T/T,L/C,D/P D/A,PayPal; Language Spoken:English,Chinese,Japanese
13	how can we guarantee quality?	Always a pre-production sample before mass production; Always final Inspection before shipment;