A rubber plug used to separate the cement slurry from other fluids, reducing contamination and maintaining predictable slurry performance. Two types of cementing plug are typically used on a cementing operation. The bottom plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing. A diaphragm in the plug body ruptures to allow the cement slurry to pass through after the plug reaches the landing collar. The top plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure.

 
1) Types Available: Conventional standard plugs and non-rotating plugs are available;
 
2) Standard: API
 
3) API and ISO certified
 
4) Specifications: 4 1/2''---20''. More special sizes or combination are available as requested.
 
5) Material: Rubbers and Phenolic Resins.

6) Application
Our cementing plugs are specially designed with a positive wiping action to ensure that the casing is clean.
The top cementing plugs is designed to exert continous pressure on the casing wall.
The fins and tail section of bottom plugs provide positive wiping action. Fins also serve as a seal while cementing. 
 
7) Structure:
The core is made of aluminum or phenolic resins, depending on the application and well conditions.
The plug is made of high performance materials such as rubbers or phenolic resins. 

 
8) Using Method:
Place bottom plug before injecting cement, and pump the scrape to clean the well-wall. After all is set, build the pressure of 2-4MPa till the rubber diaphragm is broken, and thus circulation is formed. Then inject the cement, place the top plug, pump, set the pressure, and well cementation comes to an end.

1) How can I place an order?

A: You can contact us by email about your order details, or place an order online.

2) How can I pay you? 

A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using. 

3) What's the order procedure?

A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. 

4)How do you take care when your clients received defective products?

A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment. 

5)How do you check all the goods in the production line?

A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.