Complaint
The vacuum hot pressure furnaces is used kinds of ceramic as below:
metallurgy(MIM and CIM), cemented carbide, technical ceramics (MLCC, LTCC, HTCC), 3D-Printing etc.
Vacuum hot-pressing furnace is mainly used for high-temperature sintering and hot pressing of powder ceramic materials and powder sintered materials under vacuum (or protective atmosphere), and can also be used for other metal or non-metal materials under vacuum (or protective atmosphere). High temperature sintering and hot pressing treatment.
1. Furnace body: double layer 304 stainless steel water-cooling structure, precision polishing, which is conducive to shorten the extraction time, and is easy to clean;
2. Furnace cover: double-layer water-cooled structure, with 304 inside and outside walls and precision polishing treatment, and cooling water in the middle.
3. Heating, heat preservation and temperature measurement system: the heating system uses graphite cylindrical heater to not only guarantee the best temperature uniformity and the artifact of uniform heat, but facilitate the maintenance and replacement of heating elements. The heat insulation screen on the side and the bottom is made of a composite insulation layer composed of hard felt and soft felt, which is processed into an integral heat insulation system. The machine adopts Silicon controlled to control temperature , equipped with PID function instrument, digital display meter, with over temperature sound and light alarm function. It can also choose PLC touch panel to achieve automatically control, and retain historical data to be easy to analyze the sinter process.
Supply vacuum furnace hot pressing sintering furnace small vacuum furnace laboratory equipment vacuum furnace
4. Vacuum system: it is composed of oil diffusion pump, roots pump, mechanical pump equipped with electromagnetic differential pressure valve (to prevent sudden power failure and mechanical pump oil backward), filling valve, air release valve, vacuum butterfly valve, vacuum pressure gauge (Pa), corrugated pipe, vacuum pipeline and support, etc.
5. Inflation system: it is composed of various pipelines and valves, equipped with electromagnetic deflation valve and pressure sensor. It will automatically discharge gas When the pressure in the furnace is higher than the security value. Needle valve is installed on the gas tube, which can control the inflating volume, and is used to fill argon and nitrogen in the atmosphere required for sintering process.
Techanical parameters of Supply vacuum furnace hot pressing sintering furnace small vacuum furnace laboratory equipment vacuum furnace
| Technical Specifications | |
| Working chamber size | 160*160mm (Dia*Height) |
| Furnace type | Vertical type( also could be Horizontal type,optional) |
| Temperature control zone | One zone |
| Max. temperature | 2400 oC |
| Working temperature | 2200 oC |
| Pressure head | High purity carbon graphite dia100mm (Bearing pressure not more than 63MPa) |
| Max. travel distance | 100mm (Single-track pressing from bottom) |
| Accuracy of travelling | ±0.05mm |
| Max. pressure | 0--20T (Adjustable pressure by handle and automatic freely, and the fluctuation of pressure is less than 0.05MPa) |
| Ultimate vacuum | 10-3pa |
| Working vacuum | 10-2Pa |
| Vacuum leakage rate | Less than 0.67 Pa/h |
| Vacuum system | Monoblock vacuum pump, roots pump, 50 Pneumatic valve and bellows |
| Electric control | The chain function of overheating, over pressure, low water pressure and over gas pressure can be achieved in all sorts of electric element. |
| Temperature controlling | 50 steps Programmable auto-control. Low temperature thermocouple is tungsten-rhenium thermocouple. High temperature thermocouple is Infrared temperature instrument. |
| The panel display and electric chain | Current, voltage, temperature, vacuum, water pressure display, electric chain, different circuit branch recycle cooling water and sound-light alarming. |
| Heating element | Carbon graphite |
| Insulation material | Carbon graphite hard felt + graphite soft felt (The hard felt mainly used for refractory layer after 2600ºC treatment, and soft felt mainly used in insulation layer after 1800ºC treatment, both of them working together as the insulation material) |
| Filling gas | Protective gas such as Argon, Nitrogen and other inert gas. |
| Filling gas pressure | ≤0.05MPa (Micro-positive pressure, auto-adjustable outlet gas when over pressure) |
| Furnace structure | Side open door, inner body layer is 304 stainless steel, outer layer is 304 stainless steel |
| Water cooling | Water cooling chiller,15KW |
| Rated power | 50kW |
| Rated voltage | 380V 3P |
