Pulse K1 Series 220V, 0.2KW Servo Controller,AC Motor for Fine Carving Machine

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 140

Description
Pulse K1 Series 220V, 0.2KW  Servo Controller,AC Motor for Fine Carving Machine
Product Advantage:
Intelligent

· Powerful internal position mode allows for continuous multi-path planning for rich motion control; supports up to 32 data sets for planning, each set of data can be set to the number of pulses or angle required, and internal position mode can be set for speed, acceleration, deceleration and emergency deceleration
· Automatic determination of load inertial mechanical properties, setting optimal gain and shortening system commissioning time
Stable
· Mechanical resonance frequency analysis, configured with two sets of trap filters, adjustable frequency (50 ~ 5000Hz) and trap depth, effectively overcome low frequency resonance and mechanical end vibration, vibration frequency (1 ~ 100Hz) and vibration damping can be set
Multifunction
· Frictional torque compensation reduces the effect of static friction during mechanical commutation and improves command following performance at low speeds
· Multibus support: CANopen
Easy to Operate
· Support for debugging software, mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation
Specifications:
Moudle
 K1AS02K1AS04K1AS08K1AS15K1AS22K1AS30K1AS50K1BS15K1BS25K1BS35K1BS55K1BS75
0.2KW0.4KW0.75KW1.5KW2.2KW3KW5KW1.8KW3KW3.8KW5.5KW7.5KW
Input Power
Control ModeThree-phase PWM converter sine wave drive
Main Power220V: Single-phase/three phase 220V AC(-15~+10%,50~60Hz)
380V: Three-phase 380V AC(-15~+10%,50~60Hz)
Control power 220V: Single-phase 220V AC(-15~+10%,50~60Hz)
Rated current220V:0.2KW/2A,0.4kW/2.8A,0.75kW/5.5A,1.5kW/10A, 2.2kW/12A,3kW/16A,5kW/25A
380V: 1.8kW/5A,3kW/8A,3.8kW/12A,5.5kW/16A, 7.5kW/20A 
Encoder feedback ABZ incremen encoder / absolute encoder
Environment 
Working temperature 0~45°C
Storage temperature-20~65°C 
Working humidity20~85%RH or less (non condensing)
Storage humidity20~85%RH or less (non condensing)
Working and storage airndoor (no direct sunlight), non-corrosive gases, flammable gases, oil mist, dust
AltitudeBelow 1000m
Vibration5.8m/s² (0.6G) below 10~60Hz (Cannot be used continuously at resonant frequency)
Insulation and
pressure resistance
Primary- between F and G, 1 minute under AC1500V
Functions
IO Input4-channel (DC24V optocoupler isolation) Input function can be selected according to parameters below:
 Servo on, P action, positive rotation inhibit, negtive rotation inhibit, alarm reset,positive torque limit,
 negtive torque limit, error clear
IO Output3-channel optocoupler isolated output; the following output function can be selected according to
 parameters: Alarm output, position proximity, velocity consistent detection output, motor rotation
 detection, servo ready, torque limit, brake release
Pulse inputDifferential input: 500K; open collector: 200K
Pulse + direction, AB orthogonal pulse, CW+CCW pulse
Pulse outputPhase A, phase B: differential output. Phase Z: differential output or open collector output
Internal speed command Three-speed distribution via input terminals
Overload CapacityMax. 3 times torque
Analog input2-channel differential input ±10V, 1-channel single-ended 0-10V; switch according to control mode
CommunicationModbus; Customized CAN
Control modes 12 control modes: position control, speed control, torque control, inner spped, position/speed control,
position/torque control, speed/torque control, inner speed/position, inner speed/speed,
inner speed/torque, speed/zero clamp, position control/command inhibit
Regenerative resistance 400W: without external regenerative resistance; over 750W: with 

Quality management System
1.Procurement Control Procedures
Select qualified suppliers to ensure that material quality can satisfy usage request.
 2.Production Process Flow
Each staff is required to pass the qualification test for the job position and work in strict accordance with the process documents.
 3.Quality Control Procedures
A wide range of measure are applied to control quality and they are:factory audit,signing quality agreement with suppliers,incoming materials inspection,first product confirmation,inspection during production,final inspection,production process analysis and improvement,corrective and preventive actions.


Application:

3C electronic equipment 

Packaging equipment

Printing equipment

CNC Machine tools

Textile industry

Company:
Company Environment:

Certificate:

Laboratory:

Culture:
Product Tag:
Related categories:
Scroll to Top