| STC042, THREE-FLUTE CENTER REAMER, Straight Shank, American Style |
|
|
| | | Pict | |
| | | |
| | | |
| | | |
| Included Angle: 60°, 82°, 90°, 100° | |
| Max cut diameter | Shank Diameter | Overall Length | | Max cut diameeter | Shank Diameter | Overall Length |
| |
| 1/4" | 1/4" | 1-1/2" | | 3/4" | 1/2" | 2-5/8" |
| 3/8" | 1/4" | 1-3/4" | | 1" | 1/2" | 2-3/4" |
| 1/2" | 3/8" | 2" | | 1-1/4" | 3/4" | 3" |
| 5/8" | 3/8" | 2-1/4" | | 1-1/2" | 3/4" | 3" |
| | | | | | | |
| STC042, 5-FLUTE COUNTERSINK, Straight Shank, American Style |
|
|
| | Pict | |
| | |
| | |
| Included Angle: 60°, 82°, 90°, 100° | |
| Max cut diameter | Shank Diameter | Overall Length | | Max cut diameter | Shank Diameter | Overall Length |
| |
| 1/2" | 1/2" | 3-7/8" | | 1" | 1/2" | 4-3/8" |
| 5/8" | 1/2" | 4" | | 1-1/4" | 1/2" | 5" |
| 3/4" | 1/2" | 4-1/8" | | 1-1/2" | 1/2" | 5-3/8" |
| 7/8" | 1/2" | 4-1/4" | | | | |
| | | | | | | |
| STC044, HSS 6-FLUTE CHATTERLESS COUNTERSINK, |
|
|
| | | Pict | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| Included Angle: 60°, 82°, 90°, 100° | |
| Max cut diameter | Shank Diameter | Overall Length | | Max cut diameter | Shank Diameter | Overall Length |
| |
| 3/16" | 3/16" | 1-1/2" | | 3/4" | 1/2" | 2-3/4" |
| 1/4" | 1/4" | 2" | | 7/8" | 1/2" | 2-3/4" |
| 5/16" | 1/4" | 2" | | 1" | 1/2" | 2-3/4" |
| 3/8" | 1/4" | 2" | | 1-1/4" | 3/4" | 3-3/8" |
| 1/2" | 1/4" | 2" | | 1-1/2" | 3/4" | 3-1/2" |
| 5/8" | 1/2" | 2-3/4" | | 2" | 1" | 4-3/8" |
| | | | | | | |
| STC045, METRIC HSS COUNTERSINKS & DEBURRING TOOLS, |
|
|
| | Pict | |
| | |
| | |
| Included Angle: 90°. Material: HSS, HSS-E | |
| Cutting Range | Shank Diameter | Overall Length | | Cutting Range | Shank Diameter | Overall Length |
| |
| 2 - 5 | 6 | 45 | | 25 - 30 | 15 | 115 |
| 5 - 10 | 6 | 50 | | 30 - 35 | 15 | 125 |
| 10 - 15 | 10 | 65 | | 35 - 40 | 18 | 135 |
| 15 - 20 | 12 | 85 | | 40 - 50 | 18 | 165 |
| 20 - 25 | 15 | 105 | | | | |
| Taper Shank Countersinks & Deburring tools Available also. |
Complaint
