Electronic Atomizer Rechargeable Disposable/Chargeable Vape Pen Private Label Vape 36

Jomo Lite 40 Introduction:

How to fill liquid:
1. Hold the atomizer upside down, then press and unscrew the bottom base(Please do not unscrew the top cap, this atomizer is bottom filling one).
2. Inject the liquid along the glass tube to the 2ml line(Please do not inject liquid to the middle screw hole, do not inject liquid excess the 2ml line, the liquid will spill).
3. Press and screw the bottom base back to the tank (Please screw as tight as possible to avoid leakage).
How to replace coil:
1. Press and unscrew the bottom base.
2. Hold the bottom base, press and unscrew the coil, then replace a new coil(Please make the coil is screwed as tight as possible to avoid leakage).
3. Press and screw the bottom base to the tank.

How to vape:
1. Screw the atomizer to the battery, press the power button 5 times continuously to turn the device on, do the same action if you want to turn it off.
2. Press and hold the power button while vape it. The battery will stop automatically with button light blinking if you chain-smoke for more than 10 seconds. Then re-press the button while use it again.

Attention:
* Please do not screw atomizer too tight to the battery.
* Please make sure that there is enough liquid in the atomizer when you vape.

Our company, Shenzhen Muje Technology Co., Ltd. was established in 2009 and located in Shenzhen city, Guangdong province, China. It covers land area of 10,000 sqm, with standardized GMP workshops and is equipped with advanced facilities, We focus on designing, researching and developing, manufacturing and selling electronic cigarette.

We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers, all of our products have been strictly inspected before shipment. Beside, we have received ISO9001 and BSCI.