Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 10km Reach

Min.Order: 1

Product origin: Jiaxing, Zhejiang, China

Infringement complaint:

Complaint

US$ 1 ~ 99

Description

Product Features

Supports 9.95 to 11.3Gb/s bit rates
Simplex LC Connector
Hot-pluggable XFP footprint
Uncooled 1270nm DFB transmitter, 1330nm PIN photo-detector
Uncooled 1330nm DFB transmitter, 1270nm PIN photo-detector
Applicable for 10km SMF connection
Low power consumption, < 1.8W
Digital Diagnostic Monitor Interface
XFP MSA package
Operating case temperature: Commerical:0 to 70 °C Industrial:-40 to 85 °C

Applications

10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps
Other optical link

Product Descriptions

GFC-OLXBxx1XL-CD10 is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 10km on SMF .The transceiver module comprises a transmitter with a 1270 or 1330nm DFB laser transmitter, an integrated 1330 or 1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC. Transmitter and receiver are separate within a wide temperature range of 0ºC to +70ºC for commercial temperature, -40 to 85 °C for industrial temperature, and offers optimum heat dissipation and excellent electromagnetic shielding for 10 GbE systems application.

Functional Diagram

Absolute Maximum Ratings

Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc	-0.5	4.0	V
Storage Temperature	T_S	-40	85	°C
Relative Humidity	RH	0	85	%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Data Rate	D_R	9.95	10.3125	11.3	Gb/s
Supply Voltage	Vcc	3.13	3.3	3.47	V
Supply Current	Icc5			500	mA
Operating Case Temp.	Tc	0		70	°C
Operating Case Temp.	TI	-40		85	°C

Electrical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 85 ºC,V_CC = 3.13 to 3.47 V)

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VIN,PP	120		820	m_Vpp
Transmit Disable Voltage	V_D	2.0		Vcc	V	1
Transmit Enable Voltage	V_EN	Vee		Vee+0.8	V
Input differential impedance	Rin		100		Ω	2
Transmit Disable Assert Time	T_da			10	us
Receiver
Differential data output swing	Vout,pp	340		850	m_Vpp	3
Output rise time and fall time	T_r, T_f			38	Ps	4
LOS Fault	VLOS_F	V_CC-0.5		Vcc	V	5
LOS Normal	VLOS_N	Vee		Vee+0.5	V	5

Notes:

Or open circuit.
After internal AC coupling.
Into 100 ohms differential termination. 4. 20 - 80 %.

5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 - 3.6V. Logic 0,indicates normal operation; logic 1 indicates no signal detected.

Optical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 85 ºC,V_CC = 3.13 to 3.47 V)

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	1260	1270	1280	nm
Operating Wavelength	λ	1320	1330	1340	nm
Ave. output power (Enabled)	P_AVE	-6		0	dBm	1
Side-Mode Suppression Ratio	SMSR	30			dB
Optical Modulation Amplitude	P_OMA	-2.8		0	dB	OMA
Extinction Ratio	ER	4	4.5		dB
RMS spectral width	Δλ			0.45	nm
Rise/Fall time (20%~80%)	Tr/T_f			45	ps
Dispersion penalty	T_DP			3.2	dB
Relative Intensity Noise	R_IN			-130	dB/Hz
Output Optical Eye	Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength	λ	1320	1330	1340	nm
Operating Wavelength	λ	1260	1270	1280	nm
Receiver Sensitivity	P_SEN			-14.4	dBm	2
Average Receive Power	P_AVE			0.5	dBm
Receiver Reflectance	Rrx			-12	dB
LOS Assert	Pa	-30			dBm
LOS De-assert	Pd			-17	dBm
LOS Hysteresis	Pd-Pa	0.5			dB