ATTENTION:

1. The principle of this sand cleaner is gravity. The water outlet must be at least 19inch lower than the water inlet when you use this gravel cleaner.
2. Due to manual measurement and length conversion, 0.1-0.5in error is allowed, please in kind prevail.
3. Due to the different strength of each person, and the size and water depth of the fish tank, there is no clear Drain Flow Rate. Please refer to the actual operation.
4. When washing sand: If the filter from your fish tank is powerful, you can put the outlet hose into the fish tank, and the sand is circulated in the tank without draining water. If not, it is recommended that you remove turbid water directly from the tank and change clean water.

Sand Washing Operation:

1. To isnert the tube into the sand to suck the sand (not too much);
2. Slightly lift the equipment to move the sand horizontally for wash;
3. Lift the height of the tube again to return the washed sand;
4. The sand washing is circulated in this way.

Package Included:

• 1 *Air-pressing control body
• 2 *Extension Inlet Tube
• 1 *Extension tube connector
• 1 *User Manual; 
• 1 *Duckbill suction inlet(Debris vacuum)
• 1 *Outlet hose
• 1 *Water Flow Clamp 
• 1 *Fixture clamp