Complaint
| Technical parameter | Unit | DK7725B | |||
| Table size (W*D) | mm | 320×560 | |||
| Table travel (X*Y) | mm | 250×320 | |||
| Table size(U*V) | mm | 70×70 | |||
| Max. workpiece weight | kg | 250 | |||
| Max. thickness of workpiece | mm | 320 | |||
| Max. taper angle/workpiece thickness | 12°/80mm | ||||
| Molybdenum Dia. | mm | φ0.15~φ0.2mm(recommend φ0.18mm) | |||
| Max. wire feed rate | m/sec | 1~11.4m/sec frequency adjustable | |||
| Machining precision | mm | ≤0.012 | |||
| Max. machining speed | mm2/min | ≥200 | |||
| Surface roughness | μm | one time Ra≤2.5, three times Ra≤1.2 five times Ra≤1.0 | |||
| Guide type | X,Y,U,V linear guide way | ||||
| Motor type | X,Y,U,V all stepper motor | ||||
| Axis controlled | 4 axis simultaneous | ||||
| Min. control pace | mm | 0.001 | |||
| Power supply | 380V,3Ph,50Hz | ||||
| Max. working current | A | 12 | |||
| P ower consumption | Kw | 1 | |||
| Work liquid | JR3A | ||||
| Water tank | L | 90 | |||
| Filtering mode | Paper filter/Italy pump | ||||
| Closed protective cover | standard | ||||
| Machine weight | kg | 1500 | |||
| Machine dimension | mm | 1600×1800×2080 | |||
